Wulf Mods Faze Portable Dry Herb Vaporizer
Free Discreet Shipping on $50+
100,000+ satisfied customers
Personalized Support Anytime
Wulf Mods Faze Portable Dry Herb Vaporizer
Get Fazed With Wulf
The Wulf Mods Faze Portable Dry Herb Vaporizer is going round blowing minds and unleashing herbs to their most ferocious potential. It represents the pinnacle of Wulf's dry herb tech — a high-powered handheld vape delivering the full spectrum of flavor and potency across 4 distinct temperature settings, wrapped in a weighty, ergonomic build you won't want to put down.
Key Features
- 20-second preheat
- Full-size color LED screen
- 4 temperature settings: 380°F / 410°F / 430°F / 460°F
- Magnetic mouthpiece with built-in screen
- Haptic feedback
- Auto-shut off to save battery
- Pocket-sized, portable design
How It Works
The Faze first pre-heats your dry herbs for 20 seconds to bring them up to temp, then enters a 3-minute session mode — draw freely at your own pace while the device does the heavy lifting. Simple to load, quick to use, and easy to keep clean between sessions.
What's Included
- 1x Wulf Mods Faze Vaporizer
- 2x Screens
- 1x Type-C USB Cable
- 1x Cleaning Brush
- 5x Cotton Swabs
- 1x User Manual
Available in 4 colors, including classic Wulf Pack favorites like black-red spatter and full-color spatter.
How to Use
Power On/Off: Press the power button 5x — device vibrates, LED lights up (or powers down).
Change Temperature: Press the power button 3x to cycle through settings. LED color indicates temp:
| Color | Temp |
|---|---|
| Green | 380°F |
| Yellow | 410°F |
| White | 430°F |
| Red | 460°F |
Settings stack — the highest setting lights all four colors at once.
Start a Session: Press the power button 2x to begin the 20-second preheat. The device vibrates once ready and enters a 3-minute session — draw at your leisure. It vibrates again and stops heating when the session ends.
Tip: One full session is enough to fully vape your material — swap in fresh herb before your next round.
Cancel Preheat: Hold the power button for 3 seconds to return to the home screen.
How to Load
Remove the magnetic mouthpiece and gently place ground dry herb into the chamber. Don't overfill or pack too tight — this restricts airflow and reduces vapor quality. Replace the mouthpiece and you're ready to go.
Charging
- Use only the included Type-C USB cable
- First charge: leave plugged in for 2 hours
- After that: never charge longer than 1 hour at a time
- LED flashes yellow while charging and shows battery level in 4 bars (25/50/75/100%)
- Unplug immediately once fully charged
⚠️ Warning: Do not charge with a powerbank of 5V or higher. Do not charge in a vehicle. Do not overcharge or use any cable other than the one included. Failure to follow these instructions may damage the battery and internal system.
Cleaning
- Power off the device and remove the magnetic mouthpiece, screen, and insert
- Use an isopropyl-alcohol-dampened swab to clean the mouthpiece, screen, and insert — scrub away residue and let dry fully
- Use the cleaning brush and a dry swab to clear the dry herb chamber of material and buildup
- Reassemble once everything is fully dry