Wulf Mods Flex Dual Use Concentrate and Dry Herb Vaporizer

Flex On Your Wulf Pack

Get ready to unleash your sessions with the howlingly potent Wulf Mods Flex Dual Use Vaporizer! With the Flex, we set out to flip the script by making dual use vaporizing as convenient as it is fun by equipping it with an easy swap chamber system to instantly switch your device from dry herbs to concentrates and vice versa. For material optimized clouds the Flex has a choice of 4 different temperature settings each catering to the specific needs of dry herbs (360˚, 390˚, 410˚, 440˚F) and concentrates (400˚ - 450˚F, 450˚ - 500˚F, 500˚ - 550˚F, 550˚ - 600˚).

The Wulf Mods Flex is powered by a 1,000mAh battery, uses a unique icon based display system to give you easy access to settings, and even includes vibrating haptic feedback to let you know when your Flex is all ready to go. With an easy to hold ergonomic hand design and compact handheld size the Flex is the ultimate on the go vaporizer that lets you go with the flow by hitting any materials you may come across. Personalize your Wulf Mods Flex by choosing from the 4 available color choices and start leading your pack to the ultimate dual-use session.

Loading Concentrate Into The Flex

To start dabbing with your Flex, you must first prepare it to handle concentrates. To do this start by removing the magnetic mouthpiece and placing it somewhere safe. From here you will load in the Flex Concentrate Chamber if it is not already loaded, to do this remove the Dry Herb Chamber and place it to the side before loading in the new one. When successfully loaded, the Flex will vibrate once and the concentrate symbol will display in blue.

Once your Concentrate Chamber is attached make use of the included dab tool to scoop out some of your concentrated materials and carefully load them into the Flex. Be sure not to load too much as you want there to be plenty of room for airflow and vapor production.

After you have loaded your materials, replace the magnetic mouthpiece and you are all ready to get to dabbing!

Loading Dry Herb Into The Flex

To get started vaping dry herbs with your Flex, please complete the following steps. First, you must remove your magnetic mouthpiece and place it to the side. Second make sure that your dry herb chamber is loaded and if not, replace the concentrate chamber with it. If done correctly, your Flex will vibrate once to let you know and also display the red dry herb symbol on your screen.

After you have the chamber in place, carefully fill it with ground dry herbs and then replace the magnetic mouthpiece to seal them in. From here you can immediately start vaporizing your dry herbs for some excellent cloud fun!

Using Your Flex In Concentrate Mode

To begin dabbing with your Flex, turn on your device by pressing the power button 5x in quick succession. With things up and running, you can now choose between the 4 different temperature settings by pressing your power button 3x in a row.

The Flex offers 2 distinct ways to enjoy your concentrates with Manual Mode and Pre-Heat Mode.

Manual Mode offers a traditional vape experience, simply hold down the power button on your Flex and start inhaling to enjoy your vapor. For your safety, Manual Mode has an automatic cut off at 15s. Whenever your session has concluded, press the power button 5x to power off your Flex.

To activate pre-heat mode, press the power button 2x in a row to start the Flex’s 3s concentrate pre-heat count down. To cancel your pre-heat, simply press and hold the power button for 2s.

When your concentrates have reached the proper temperature, the Flex will vibrate 2x to let you know and enter Warm Mode for 13s to let you freely draw your vapor. After the 13s of warm mode, the Flex will vibrate 1x and go back to standby.

Using Your Flex In Dry Herb Mode

To use your Flex in dry herb mode kick things off by pressing your power button 5x in quick succession to switch the device on. When you correctly input, your Flex will turn on and you will now be able to switch between the 4 available heat settings.

Once your device is on and temperature set, get started by activating the Flex’s Pre-Heat mode by pressing the power button 2x in a row. This will begin a 20s preheat mode where your dry herbs are slowly brought to heat before transitioning into a 3 minute warm mode. This gives you a full 3 minutes of luscious dry herb seshing that you can enjoy at your own leisure. When the 3 minutes is up, your Flex will vibrate 1x and return to standby.

Adjusting The Flex’s Temperature

To change between the 4 different temperatures press the power button 3x in a row to cycle to the next voltage in line. You can always check your current temperature by taking a look at your screen and viewing how many bars are full with 1 being the lowest and 4 being the hottest.

Pre-Heating Your Flex

To Pre-Heat your Flex Vaporizer press the power button 2x in a row.

When you are in Concentrate Mode pressing the power button 2x will start a 3 second warm up before your Flex vibrates 1x to let you know it's ready to go. From here you get a 13s warm mode where your Flex maintains heat to allow for a series of potent cloud hits. Once done, your Flex will vibrate once more to let you know before returning to stand by.

When in Dry Herb Mode, pressing the power button 2x will begin a 20s pre-heat countdown where your materials are gradually brought to heat. Once completed, your Flex will vibrate 1x to let you know it's ready to hit and enter a 3 minute warm mode to give you the freedom to casually draw on your herbs at your leisure. After the 3 minutes are up, your Flex will vibrate 1x more to let you know before switching to standby mode.

Troubleshooting The Flex 

To ensure to smoothest of sessions with your Pack, please be aware of the following troubleshooting warnings that can appear on your Flex.

• Connection Issue - If your Flex flashes its red LED light 3 x in a row, this is to indicate that the connection isn't correct. Please remove your chamber and ensure it is clean, before attempting to continue your session. 

How To Charge The Flex

To charge the Flex makes use of the USB-C Cable that shipped with your device. When plugged in correctly, your Flex’s battery icon will begin to flash and a bar will display indicating which level it's currently at. When the Flex is fully charged, the flashing will stop and all 4 colors will shine to let you know it's time to unplug.

The first time you charge your battery make sure to leave it plugged in for a full 2 hours, every time after this never charge your battery for longer than 1 hour at a time to ensure proper life span and reduce short circuit risks.

How To Clean the Flex

To clean your Flex first disassemble both the mouthpiece and material chamber before making use of a swab dampened with isopropyl alcohol to gently scrub away at any left over materials stuck to these components. After cleaning, always make sure to leave ample time for your device to dry before continuing use.

What’s Included:

• (1) Wulf Flex Dual Use Vaporizer Battery
• (1) Dry Herb Chamber
• (1) Concentrate Chamber
• (1) Dab Tool
• (1) Cleaning Brush
• (5) Cotton Swabs
• (1) USB-C Cable